Series ITJ

This model meets many of the needs for testing asphalt core samples 100 and 150 mm diameters. The unit meets test method requirements of AASHTO TP9. These extensometers are single integral, bi-axial units which measure both lateral and vertical deformations.

Indirect Tensile Test Device according to EN 12697-23 or AASHTO TP-31 and ASTM D4123

Indirect tensile jig made of stainless steel available with interchangeable radius loading points. With Axial deformation measurement and an accurate on-specimen lateral deformation measurement. Available with phase angle measurement for damping and loss modulus calculations without post-test corrections. Also available is a test control and test report of resilient modulus and poisson’s ratio. Indirect tensile Jig for Ø 100 mm and for Ø 150 mm.  To measure the deformation Extensometer Type 3910 is available.

Series STD

Shear Test Device for asphalt samples Ø 100 / 150 mm (Marshall compacted samples).

Asphalt Shear Test Device

Applicable for all Load Frames. Stiff construction.

Series FDS

Testing Device for frozen-temperature depending behaviour of core or asphalt specimen with constant heights.

Frozen-Dependent Stress Test Device

Testing device measures the stress behaviour of asphalt samples during increasing temperatures and constant heights. Temperature independent measuring device with special steel construction with two high accuracy displacement transducer. End caps for different sample heights from 100 to 600 mm and diameters up to 200 mm.

Series BF

Test rig completely made of stainless steel. It features an adjustable transducer.

Beam Fatigue Test with 4 Point Bending Test Device

In very stiff construction with high accuracy vertical displacement transducer ±1 mm. Including quick clamping device and torque calibration device.

Large Range of other jig, fixtures and accessories from simple uniaxial test jig, pressure cells, autoclaves, triaxial cells adaptable to multiple specimen sizes with versatile transducer configuration are available upon request.