Basic Compression Testing Machines
Series D5

Very basic stand-alone model with integrated hydraulic power pack in the lower part and digital controller or display in the upper part.

Frame

• High stiffness 4-column construction
• Single acting ram
• Hydraulic power pack with oil-air cooling system is integrated on the side
  
• Digital controller or display and optional paper roll printer are integrated in the upper part
  
• Lower compression platen with surface engraving for centring of specimens
  
• Hardness > 55 HRC
  
• 3 intermediate platens Ø 227 x 50 mm to reduce test chamber height to 280 / 230 / 180 mm
• Protection device around testing space
  

Control

• Servo-controlled test procedure in closed loop mode in connection with servovalve and digital controller DIGICON 2000
• Manual controlled test procedure with loading and unloading valves and digital read-out DIGICON 1000
• Optional in connection with PC and building material testing software PROTEUS

Accessories / Options

• Upper spherically seated compression platen
  for cylinder test conformity
• Test chamber height 210 mm
• Paper roll printer
• Testing devices
• Extensometers