Series LFV - L 1 - 25 kN
Versatile and compact test systems configurable to meet the demands of modern testing laboratories, R & D centres, institutes and universities. The Series LFV - L tabletop systems are currently available in with force capacities ranging from 1 kN up to 25 kN.
Table-Top Dynamic Testing Systems These fatigue rated systems represents the ideal solution to perform a large variety of static and dynamic materials tests. This series is well suited to perform static tension, compression, flexure and shear tests, LCF - low cycle fatigue testing, fatigue crack growth testing, fracture toughness testing, further typically applications includes testing of biomechanical products and implants and more. The load frame features rigid designed with high axial and lateral stiffness with high natural frequency. The upper crosshead is mechanically clamped and features automatic, motorized, positioning (lifting/lowering). Integrated in the upper crosshead is the fatigue rated actuator with co-axially mounted displacement transducer. The manifold with servo valve is mounted direct on the actuator for the highest possible response and most accurate test control. The close coupled accumulators minimize the hydraulic pressure fluctuations. The fatigue rated, low-profile, low mass designed precision load cell features high natural frequency and excellent long term stability. The LFV-L is available with the alignment fixture for the adjustment of load string alignment complying with ASTM E1012 or other standards. It is capable to perform alignment adjustments while the load train is fully preloaded. As accessory the alignment verification equipment with strain-gauged specimen, electronic and software is available. The system is supplied with the state-of-the-art machine base. As space saving system the solution with integrated hydraulic power pack up to 6 l/min. oil flow is available. Otherwise the machine is supplied with the low noise free standing hydraulic power pack Series PAC. To meet the full range of mechanical testing needs the LFV-L can be configured with a variety of grips and fixtures, extensometers, environmental chambers, different software packages and other accessories. The LFV-L is also available with axial/ torsional drive, upgrading your system from axial only to axial/torsional performance. Standard ratings are 20, 50, 100 and 200 Nm. The torsional angle can be chosen to meet your specific testing needs. | Options for Testing Actuator - mounted on upper crosshead
Options for Hydraulic Power Supply: - integrated in the machine base
- separate free standing power pack
Options for Crosshead Adjustments Facilitating Repositioning: - M: Locking: Mechanical Lift: Manual
- ME: Locking: Mechanical Lift: Electrical
Applications |
Dynamic Testing Systems 
