Second Hand Universal Testing Machines
|
- are in perfect condition
- are completely overhauled
- are calibrated through our accreditiated calibration laboratory according to international standards including calibration certificate.
We offer for all machines our different modernisation packages. They can be upgraded with digital readout or for automatic testing in closed loop mode with digital controller and PC running material testing software.
|
50 kN Universal Testing Machine
Make Amsler Type 5 Z46
Modernised for compression and tensile tests in closed loop mode:
- Servovalve, Digital controller PCS1000, PC, Printer and testing software DION
- separate new hydraulic power pack Type PAC 1.0 Ltr. / min.
- Manual wedge grips for round and flat samples 20 mm
Price: EUR 17'500.00
|
|
|
100 kN Servohydraulic Testing Machine
Type w+b LF 100 kN
- Load frame with actuator integrated in the base of the machine and mechanical movable upper crosshead.
- 19“ control console with integrated hydraulic aggregate, manual loading regulator and unloading valves, digital read-out DIGICON 1000 and PC with reporting software PROTEUS
- Wedge grips with inserts for specimens Ø 5 - 20 mm and ‚ max. 16 x 60 mm.
Price: EUR 30'000.00
|
|
|
100 kN Tensile Testing Machine
Make Amsler Type 10 ZD 1032
Control console with integrated hydraulic power pack and
Option 1: Manual loading and unloading valves, digital readout
Type DIGICON 1000 for force-displacement/deformation display
and PC with analysis and reporting software PROTEUS
Option 2: Servovalve, digital controller type PCS1000 and
PC with Testing Software DION for closed loop control
for tensile tests according to EN 10002-1
Price:
Manual Control EUR 25'000.00
Closed Loop Control EUR 33'000.00
|
|
|
100 kN Electromechanical Universal Material Testing Machine
Make w+b Type LFMZ 100 kN
· Electromechanical central ball screw drive
- Mechanical clamped and movable upper crosshead
- for tension, compression, creep, relaxation and LCF testing
- with digital controller PCS5000, PC, Printer and testing software DION
Price: EUR 30'000.00
|
|
|
250 kN Servohydraulic Universal Testing Machine
Completely overhauled and modernized with:
control console with integrated hydraulic aggregate, servo valve, digital controller type PCS1000 with PC and testing software DION for testing in closed loop mode. Wedge grips with inserts for specimens Ø 5 - 20 mm and flat 0 - 12 x 60 mm. Manually movable upper crosshead.
Price: EUR 39'000.00
|
|
|
Used 20 kN Dynamic Testing Machine
w+b Type LF 20 kN
for static and dynamic testing of components
- Testing frame complete with load cell, piston stroke transducer & servovalve
- 19” console with integrated hydraulic power pack
- Table with digital controller PCS5000, PC, printer & testing software DIONPRO
Price: EUR 37'500.00
|
|
|
Servohydraulic Universal Testing Machine
Test Load 600 kN Static and 400 kN Dynamic
Amsler Type 60 ZD 1368
Modernised complete with:
New digital controller type PCS5000 with PC and testing software DION for testing in closed loop mode.New hydraulic power pack type PAR 80. Hydraulic wedge grips for round and flat specimens up to Ø or width 40 mm.
|
|
|
250 kN Dynamic Testing Machine Frame
Type Schenk Hydropuls PCS 0012
- Servo-Actuator with inductive displacement transducer placed in the machine base
- Upper crosshead mechanical clamped and height adjustment through electric motor, Up / Down buttons on the right hand side of the machine base
- Load cell mounted on upper crosshead
- Testing table with t-slots
- without wedge grips
|
|
|
Single Acting Actuators 20 – 1000 kN
Amsler Type EPZ 20 / 50 / 100 / 200 / 500 / 1000 kN
for static and dynamic structural testing with pulsating cycles
- Hydraulic pressure at static nominal force 376.7 bar
- Dynamic capacity 50%
- Single acting piston with retraction springs
- Base plate with swing axle, lockable
- Mechanical piston stroke limit
- Extension spindle with spherically seated compression platen
- Can be used in upright, overhead, horizontal and any position in-between
Price: EUR 2'000.00 - 10'000.00
depending on size
|
|
|
1000 kN Testing Rig Amsler
for static or dynamic testing of structures
in connections with testing actuators.
Price EUR 16'000.00
|
|
|
200 kN Servohydraulic Testing Machine
Wolpert Typ U20 – 200 kN
2-chamber-construction with upper mounted single acting actuator.
Below: tensile chamber with wedge grips for specimens up to Ø 16 mm / flat 15 mm.
Above: compression / bending chamber (with compressing platens Ø 180 mm & bending device).
Without control console.
|
|
|
